Water filter Omnipure K2528 granular activated carbon cartridge 1500 gallons 2″ x 10″
Water filter Omnipure K2528 K-Series 2" X 10" granular activated carbon for chlorine and odor reduction, improve colour and taste
The water filter K2528, like all the other water filters from the K series built on the success of the previous generation of in-line filters. Perfect for limited space installation such as water drinking fountain or under the counter installation. Perfect for limited space installation such as for water drinking fountain or under the counter water cooler.
Need volume pricing? Just fill out our form to quickly get a quote. Usually shipped within 1-2 days
SPECIFICATIONS
- Flow Rate 0.5 gpm
- Maximum Operating Pressure 125 psig
- Operating Temperature 2 to 38 ºC - 35 to 100 ºF
- Rated Capacity 1,500 gal/1 Year
- Reduction of chlorine, taste, color, and odor reduction
- Flow Capacity 1,500 gal
- Available with connections 3/8" (KK), 1/4" (JJ) or screwed 1/4" & 3/8" of your choosing (BB)
Standards
- ANSI (American National Standards Institute)
- NSF (National Sanitation Foundation)
System Tested and Certified by NSF International against ANSI / NSF Standard 42 for the reduction of Chlorine, Class 1 and Taste and Odor.
With various lengths, and diameters, these filters can be tailored to fit your specific needs. Available with quick connect fittings, as well as female pipe thread, the already simple and effective design can be installed in seconds. The K-Series 2” diameter filters are available in 6” and 10” lengths, and the 2.5” diameter filters are available in 6", 8", 10", 12" or 14" lengths.
Additional infos
- Fine filtration of treated drinking water to ingredient water quality
- Helps standardize beverage quality at disparate locations
- Enhances carbonation
- Reduces maintenance problems in water-using equipment
- Removes more than 95 % of disinfectant chlorine
- Takes out common earthy, fishy, musty tastes and odors
- Filters out fine particulates, including dirt, rust, oxidized, iron, manganese, and sulfide
- Recommended for restaurants, hotels and other food services
Cap and body are spin welded together producing a smooth, consistent seal without the use of glues or binders that can cause contamination. The result of these design and production techniques is a reliable filter that is fast and easy to install.
One of the primary uses of this product is as a system component. The benefit is derived from the fitting being molded directly into the filter cap, greatly reducing clearance. Shown here (right) is a reverse osmosis system with the traditional 12 in x 2.5 in filter configuration. Notice that all the filters are uniformly attached. This results in the most efficient use of available space and greater filtering performance in a smaller overall area.
The K-Series filter is available in 6 in, 8 in, 10 in, 12 in or 14 in lengths manufactured in 2 in or 2.5 in diameters. The true benefit is that systems can be designed to incorporate the various lengths and diameters - either all the same size or intermixed - to meet specific filtration needs.
Installation & operation
- Note flow direction of filter.
- For quick connect fittings, push scratch free tube end into the fitting until it bottoms. Threaded fittings must be wrapped with PTFE tape before installation. Install PTFE taped fittings and tighten firm. Use two wrenches to firmly tighten tubing.
- Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
- Replace cartridge when rated capacity (1,500 gallons) is reached, or when flow becomes too slow.
Learn more
Product type
Water filtration
59,95 $
