BACK

Water filter Omnipure K2515, 1 Micron Lead Reduction Block, 750 ga.

Water filter will help providing fresh tasting water

The water filter OMNIPURE K2515, juste like all the water filters from the K-Series is built on the success of the previous generation of in-line filters. Reduces leads, chlore and cyst. Improve the taste of your water with minium installation and cost. Ideal for water fountains, coolers and undersink installations. 

Not sure what water filter to get? contact us.

Need volume pricing? Just fill out our form to quickly get a quote.   Usually shipped within 1-2 days

HIGHLIGHTS

• Flow Rate 0.5 gpm
• Maximum Operating Pressure 125 psig
• Operating Temperature 2 to 38 ºC - 35 to 100 ºF
• Rated Capacity 750 gal/1 Year
• Reduction of lead, cyst, chlorine, taste, color, odor, and VOC reduction
• Flow Capacity 750 gal
• 1/4", 3/8" Quick Connect and FTP 1/4"
• Water filter heads sold separately.

Standards

• ANSI (American National Standards Institute)
• NSF (National Sanitation Foundation)

ANSI (American National Standards Institute) / NSF (National Sanitation Foundation) International Standards

This filter was tested and Certified by NSF International against ANSI / NSF Standard 42 for Taste and Odor Reduction and Chlorine Reduction Class I. Standard 53 for Lead and Cyst reduction.

Performances

With various lengths, and diameters, these water filters can be tailored to fit your specific needs. Available with quick connect fittings, as well as female pipe thread, the already simple and effective design can be installed in seconds. The K-Series 2” diameter filters are available in 6” and 10” lengths, and the 2.5” diameter filters are available in 6", 8", 10", 12" or 14" lengths.

Cap and body are spin welded together producing a smooth, consistent seal without the use of glues or binders that can cause contamination. The result of these design and production techniques is a reliable filter that is fast and easy to install.

One of the primary uses of this product is as a system component. The benefit is derived from the fitting being molded directly into the filter cap, greatly reducing clearance. Shown here (right) is a reverse osmosis system with the traditional 12 in x 2.5 in filter configuration. Notice that all the filters are uniformly attached. This results in the most efficient use of available space and greater filtering performance in a smaller overall area.

The K-Series filter is available in 6 in, 8 in, 10 in, 12 in or 14 in lengths manufactured in 2 in or 2.5 in diameters. The true benefit is that systems can be designed to incorporate the various lengths and diameters - either all the same size or intermixed - to meet specific filtration needs.

Installation - Operation

• Note flow direction of filter.
• Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
• Replace cartridge when rated capacity is reached, or when flow becomes too slow.

View all OMNIPURE

Learn more

59,95 $